top of page
  • alethketatee

ATSEND Download







ATSEND Patch With Serial Key [Win/Mac] --------- AT is the heart of most modem-based applications. ATSEND Serial Key is a small tool to send and receive AT commands and process the results. ATSEND supports the following commands. ATDT - Send "ATDT" to the modem ATD - Send "AT" to the modem ATDD - Send "ATDD" to the modem ATM - Send a modem hangup signal ATN - Send "ATN" to the modem ATCT - Send "ATCT" to the modem AT+CRS=N - Send AT+CRS=N to the modem AT+CST=N - Send AT+CST=N to the modem ATZ - Send "ATZ" to the modem +CRS - (Called "caller id") - Send "+CRS" to the modem +CRM - (Called "caller id") - Send "+CRM" to the modem +CTS - (Called "Caller Tone") - Send "+CTS" to the modem +CST - (Called "caller id") - Send "+CST" to the modem +RI - (Ring Indicator) - Send "+RI" to the modem Required environment variables: ---------------------------- COMBASE - Base of the non-standard COM port. Most systems will use COM2. The base number can be specified by environment variables. COMIRQ - IRQ number of the non-standard COM port. Some modems are not compatible with COM2. The base number can be specified by environment variables. Example: ATSEND COM2 DEV=1 COMBASE=2 COMIRQ=5 ATSEND will cause the program to dial the telephone number of COM2 and the modem port the first time it is run. It will use COM2 and set the DSZPORT to 1. ATSEND usage: ------------- ATSEND [COMPORT]=[COMENVIRONMENTVARIABLE] COMPORT - Specify the non-standard COM port, or switch from standard to non-standard. Most systems have COM2 defined in the BIOS, but you can use the environment variable COM2 as well. COMENVIRONMENTVARIABLE - Tells the command-line to use the specified COMENVIRONMENTVARIABLE. This variable can ATSEND PC/Windows 2022 We assume that the key macro name is KEYMACRO. The default key macro is 'Oem_Ctrl1' if omitted. The user can supply their own keyboard macro names. The following is a sample set of macros that can be used: Control Key Macros: Oem_Ctrl1 Oem_Ctrl2 Oem_Ctrl3 Oem_Ctrl4 Oem_Ctrl5 Oem_Ctrl6 Oem_Ctrl7 Oem_Ctrl8 Oem_Ctrl9 Oem_Ctrl0 Oem_Pause Oem_Backspace Oem_Delete Oem_Print Oem_Insert Oem_Up Oem_Down Oem_Left Oem_Right Oem_Clear Oem_Home Oem_End Oem_Execute Oem_Help Oem_Discard Oem_Execute_EOL Oem_Enter Oem_Exit Oem_NumLock Oem_Mute Oem_Suspend Oem_Off Oem_Belt Oem_Briefing Oem_Connect Oem_Disconnect Oem_Terminate Oem_Greeting Oem_Command Oem_DC Oem_RDC Oem_DC2 Oem_RDC2 Oem_Monitor Oem_Monitor_Delay Oem_Modem Oem_Tone Oem_Voicestat Oem_Att_Press Oem_Att_Hold Oem_Att_Resp Oem_Att_Resp_Hold Oem_Modem_Prefix Oem_Modem_Prefix_Delay Oem_Modem_Prefix_Delay_Sender Oem_Modem_Prefix_Delay_Reciever Oem_Modem_Prefix_Delay_Reciever_Hold Oem_Data_Bit_LF Oem_Data_Bit_LF_Sender Oem_Data_Bit_LF_Reciever Oem_Data_Bit_DC Oem_Data_Bit_DC_Sender Oem_Data_Bit_DC_Reciever Oem_AT_Prefix 1d6a3396d6 ATSEND ATSEND is a small, non-kernel module that is designed to send the AT commands to a Hayes compatible modem. The Hayes compatible modems have been specially modified by Parker Hayes, and ATSEND is not a standard modem driver, but rather a Hayes compatible modem driver. Hayes compatible modems should include DIP switches or jumpers to select the serial port the modem should be connected to, as well as the COM base and COM IRQ. ATSEND needs a Hayes compatible modem plugged into a Hayes compatible serial port. ATSEND is not a standard Hayes compatible modem driver. To use ATSEND it is necessary to configure the serial port or COM ports to match the modems jumper or switches settings. ATSEND is not as efficient as a kernel or standard Hayes compatible modem driver, but since it is very easy to use it is probably the best option for hobbyists and DOS programmers who want to do Hayes compatible modem programming. Basic Syntax: ATMODEM=COMPORT(P) ATMODEM=0,COMPORT(P) ATMODEM=0,0,COMPORT(P),0 ATMODEM=1,COMPORT(P),0,0 ATMODEM=COMPORT(P),0,0 ATMODEM=0,0,0,0 ATMODEM=COMPORT(P),0,0,0 Note: The P appears after the COMPORT, and may be a modifier to a "non standard" COM port. This is not a standard AT command. If there is no P after the COMPORT then ATSEND will use the standard COMPORT. The following text describes the AT commands that ATSEND will attempt to use for Hayes compatible modems: ATC ATZ ATD DIAL NOZ The following text is an example for a Hayes compatible modem which is configured to use the COM port COM1 with the COM port switch SW1 set to 2 (COM3) with the COM port switch SW2 set to 1 (COM2). ATMODEM=COM1,COMPORT(SW1),COMPORT(SW2),0 If a Hayes compatible modem is set to no dial tone then this AT command will bring up the phone number you are trying to call on the dial tone. ATD=”800 555 1212” A call can be made using What's New in the? A tool for interacting with Hayes compatible modems and terminals. ATSEND makes it easy to send and receive AT commands to a Hayes compatible modem from the DOS command prompt. ATSEND is released under the GNU GPL, and can be downloaded from the web, but you'll need to email me or post a comment and I'll give you the address. ATSEND is designed to work with any Hayes compatible modem with the port set to COM2. The Hayes standards require that there be two data pins, but many manufactures set the COM2 port as the data pins. ATSEND, however, will use the other pins as data pins. If you have a modem with both COM1 and COM2 set as data pins, you'll need to give me the settings for the other pins, so I can set the ATSEND. Notes: As of 1/24/05, a list of settings to work with the Hayes compatible modems will be posted on the ATSEND page on the website. The command line flags, named ATSEND, RSZ, MSZ and TXCOM help you with some of the commands. The most common command is called "ATSEND", and it sends the AT commands to the modem. The data being transmitted are set with "TXCOM", and the voice is set by "RSZ". There is also a command called "TXCOM" which can be used to send a voice, and "RSZ" which can be used to transmit data. Usage: ATSEND is very simple to use. You call it like this: atsend COM1 RSZ Which means, send the AT command "RSZ" to the Hayes compatible modem, on the COM1 port. Please email me or post a comment, if you have any problems. A: Asynchronous Terminal Emulator (ATE) is the DOS program, or really, the hardware on your computer that allows your DOS programs to transmit commands to a modem. AT commands are basically command strings sent from a modem to a program. ATSEND is one DOS program that is designed to send AT commands to the Hayes compatible modems. It is a command line utility, that is to say, it's only useful when you run it from the DOS command prompt, or a DOS batch file. You might want to try ATTERM to try ATSEND, which is similar to ATSEND in that it is designed to send AT commands to a modem, but ATTERM allows for AT commands to be sent to the modem's line interface, which is essentially the other end of your phone line. President Donald Trump has ruled out a further meeting between himself and Vladimir Putin despite the Russian president recently insisting their get-together in Helsinki was a “good start”. “I don’t think we’ll have System Requirements: Mac OS X 10.7 or higher Intel-based Mac (recommended) 8GB of RAM (8GB recommended) A Hard Disk Space of at least 5 GB (10GB recommended) Apple TV 2If you have a couple hours to kill this weekend, you can get your geek on with Marvel Heroes 2015, and get a taste of some of the Marvel Universe’s greatest heroes. It’s the first game to be revealed for next-gen consoles. The announcement comes from Lucasfilm/


Related links:

11 views0 comments

Recent Posts

See All

Angry Birds 2: The Most Popular Bird Game in the World

How to Download Angry Birds 2 for Free Angry Birds 2 is the sequel to the popular mobile game that features colorful birds, green pigs, and a slingshot. It is a fun and addictive game that challenges

bottom of page